VIVANT VLeaF Vaporizer – Hybrid Ceramic Heating

The VIVANT VLeaF is a pen-style hybrid vaporizer designed for dry material. Its 45W ceramic heating chamber uses a helical air path to combine convection and conduction heating, reaching the selected temperature in about 30 seconds. Five preset temperature levels, a built-in 2800mAh battery, and an included water pipe adapter provide several ways to customize each session.

Important note; First dry herb vaporizer? Read our Beginner's Guide to Choosing the Right Vaporizer for Your Needs.

The VLeaF offers temperature settings from 370°F to 420°F, while five LED indicators show temperature level, battery status, and device operation. VIVANT also specifies a fully isolated air path, and the entire device is controlled through a single power button.

Main Features

• 45W hybrid convection and conduction heating
• Ceramic heating chamber with helical air path
• Fully isolated air path
• Approximately 30-second heat-up time
• Five temperature settings: 370°F, 383°F, 395°F, 408°F, and 420°F
• Built-in 2800mAh Li-ion battery
• Five LED temperature and battery indicators
• Single-button operation
• 90-second session cycle
• Automatic shutoff after 10 minutes of inactivity
• Included water pipe adapter
• Pen-style form factor
• USB charging
• Approximately 2-hour full charge using a 1A wall adapter
• Designed in Costa Mesa, California
• Can be combined with other discounts when bundled on 421Store

Battery Indicator

• 1 LED: 1–19%
• 2 LEDs: 20–39%
• 3 LEDs: 40–59%
• 4 LEDs: 60–79%
• 5 LEDs: 80–100%

What’s Included

• 1 VIVANT VLeaF vaporizer
• 1 water pipe adapter
• 1 silicone sleeve
• 1 packing tool
• 1 cleaning brush
• 1 USB cable
• 1 extra O-ring
• 1 stainless steel mesh, Mesh No. 200

Loading and Session Operation

Twist and pull off the top cap to access the ceramic chamber. VIVANT recommends loading approximately 0.1–0.3 g of ground dry material at a time, then twisting and pressing the top cap back into place.

Press the power button five times quickly to turn the VLeaF on. Press and hold the button for two seconds to start a session. The LEDs flash during the approximately 30-second heating period and remain lit when the device is ready. Each session runs for approximately 90 seconds, and the device automatically turns off after 10 minutes without activity.

Temperature, Charging, and Reset Controls

While the VLeaF is on, press the power button twice to enter temperature adjustment and continue pressing twice to move through the five temperature levels. Press and hold the button until the LED turns off, or simply wait for it to turn off automatically, to confirm the selected setting. A single press while the device is on displays the remaining battery level.

Charge the VLeaF with the included USB cable; VIVANT recommends a 1A wall adapter. The charging indicator remains red while charging and turns off when the battery is full, with a full charge taking approximately two hours. If a factory reset is needed, turn the device off and hold the power button for 10 seconds; the LED remains lit for five seconds to confirm the reset.

Questions about the VLeaF or current discounts? Contact support@421store.com.

This product and all products on 421Store are intended and sold for legal purposes only.