Glow kit can enail paired with dab rig when you are at home, and a portable dab vaporizer when you are outside.

RELEAFY Glow dab pen with 2-IN-1 multi-funcion, adjustable airflow and 3 setting heat mode, has been appreciated and praised by many users. 

Specifications

• 3 HEAT SETTINGS: Voltage settings range from 3.4V to 4.2V, answering the demand of both flavor chasers and cloud chasers.

• ADJUSTABLE AIRFLOW: Airflow controlling unit functions as a carb cap. Letting more air or less air in is totally within your control.

• ISOLATED AIRFLOW PATH: It can’t be worse to have any taste other than that of your dabs, so we design an isolated path separate the airflow from any electronic parts and make sure purer flavor.

• WATER PIPE ADAPTER (water pipe is not included): Glow enail fits perfectly with 10mm, 14mm and 18mm female joint of water pieces. (The glass mouthpiece that used on dab pen mode can also work as a 10mm WPA.)

• Battery: Built-in 1000mAh

• Glow 2-in-1 enail offers three output options, ranging from 3.4V – 4.2V.

•  Glow kit support voltage swift, from 3.4V-3.8V-4.2V, answering the demand of both flavor chasers and cloud chasers

Dimensions

• Enail mode: Φ22*118mm
• Dab pen mode: Φ22*116.5mm
• Glow enail fits perfectly with 10mm, 14mm and 18mm female joint of water pieces (Note: The glass mouthpiece that used on dab pen mode can also work as a 10mm WPA.)

How to use Glow 2-in-1 enail?

• Step 1: Remove the heat-insulated cap, and load the chamber with concentrates.

• Step 2: Quickly click the button 5 times to turn on the device, then click 3 more times to circle through voltage settings and select the voltage you prefer.

• Step 3: Insert the device into female joint of water piece. Click the button twice or hold the button down to heat up. Allow several seconds for it to heat up before inhaling. Press the airflow controlling unit to let more air in if necessary.

• Note: Charge fully before using.

How do I turn Glow dab nail into dab pen mode?

Twist off the airflow controlling unit and WPA, and screw the glass mouthpiece on the top and airflow controlling unit on the bottom.

How do I clean the device and accessories?

• Heating Chamber: Clean it with q-tip dipped in isopropyl alcohol, or soak it in isopropyl alcohol. Dry it completely and dry burn with the device to vaporize all the residuals.

• Battery: Turn off the battery. Remove the connect ring, then clean it and the battery with q-tip or alcohol pad.

• Airflow Path: Turn off the battery. Clean it with cleaning brush dipped in isopropyl alcohol.

• Glass Mouthpiece & Airflow Controlling Unit & WPA & Heat-insulated Cap: soak it in isopropyl alcohol and dry it completely.

What’s in the box

Glow device accessories include 1* extra heating chamber, glass mouthpiece, USB-C cable, dab tool, cleaning brush, user manual.